NitroTek
WARRIOR 4WD BUGGY- PRO VERSION WITH REMOTE STARTER
| 185mm | |
| 505mm | |
| 310mm | |
| 315~320mm | |
| 310mm | |
| 30mm | |
| 3300g | |
| 2 channel |
- ,
A remote start upgrade is available as an option.
, ,- ,
- New C-hub steering; ,
- Newly developed suspension; ,
- Twin adjustable rear suspension; ,
- Four wheel drive ,
- Lightweight ultra-compact gear box; ,
- Solid aluminum chassis; ,
- Width of only 129mm; ,
- Quicker steering and fast response; ,
- 16mm super big bore oil shocks; ,
- New gear ratio; ,
- Easy maintenance pinion gearbox; ,
- All Steel Gear; ,
- Adjustable Sway bar ball cups (Pro only); ,
- Adjustable high-downforce wing; ,
The Warrior is a fully built, fully featured, race ready, ...
NitroTek
WARRIOR 1/8 NITRO RC BUGGY - PRO VERSION
| 185mm | |
| 505mm | |
| 310mm | |
| 315~320mm | |
| 310mm | |
| 30mm | |
| 3300g | |
| 2 channel |
- ,
- ,
- New C-hub steering; ,
- Newly developed suspension; ,
- Twin adjustable rear suspension; ,
- Four wheel drive ,
- Twin brake system ,
- Lightweight ultra-compact gear box; ,
- Solid aluminum chassis; ,
- Width of only 129mm; ,
- Quicker steering and fast response; ,
- 16mm super big bore oil shocks; ,
- New gear ratio; ,
- Easy maintenance pinion gearbox; ,
- All Steel Gear; ,
- Adjustable Sway bar ball cups (Pro only); ,
- Adjustable high-downforce wing; ,
The Warrior Pro is a fully built, fully featured, race ...
NitroTek
WARRIOR 1/8 NITRO BUGGY - STANDARD VERSION WITH REMOTE STARTER
| 185mm | |
| 505mm | |
| 310mm | |
| 315~320mm | |
| 310mm | |
| 30mm | |
| 3300g | |
| 2 channel |
- ,
A remote start upgrade is available as an option.
, ,- ,
- New C-hub steering; ,
- Newly developed suspension; ,
- Twin adjustable rear suspension; ,
- Four wheel drive ,
- Lightweight ultra-compact gear box; ,
- Solid aluminum chassis; ,
- Width of only 129mm; ,
- Quicker steering and fast response; ,
- 16mm super big bore oil shocks; ,
- New gear ratio; ,
- Easy maintenance pinion gearbox; ,
- All Steel Gear; ,
- Adjustable Sway bar ball cups (Pro only); ,
- Adjustable high-downforce wing; ,
The Warrior is a fully built, fully featured, race ready, ...
NitroTek
HSP BRUSHLESS AIR RACER - 2.4GHZ
| 1/10 | |
| 2.4Ghz | |
| 1 x Brushless 3500KV + 1 x Brushless 2315KV | |
| 1 x Brushless 25A, 1 x Brushless 18A | |
| 1 x Micro Servo |
- ,
- Battery and charger are not included ,
- ,
- Unique fun model ,
- Twin brushless motors and ESCs ,
- Simple design for easy maintenance ,
- Runs on smooth surfaces such as concrete, dirt, snow, sand etc (not water) ,
- 2.4Ghz radio equipment ,
NitroTek
FS RACING BOLT 2WD ELECTRIC REMOTE CONTROL BUGGY
| 380mm | |
| 250mm | |
| 148mm | |
| 268mm | |
| 28mm (Front), 46mm (Rear) | |
| 245mm (Front), 260mm (Rear) | |
| 8.51 | |
| 2WD | |
| AM 27 Mhz | |
| 7.2V 1800mAh Ni-Cd Rechargeable |
- ,
- Remote control cars electric Motor: RC540 ,
- ,
- All new ball differentials made in Taiwan ,
- Dust-proof sealed gear box ,
- Fun 2WD, rear motor setup ,
- Adjustable throughout ,
- Oil filled shock absorbers ,
- Aerodynamic body and spoiler ,
- Fully built with everything included ,
- High grip tyres ,
NitroTek
LARGE SCALE HC HOBBY B-25 MITCHELL 5CH RC AEROPLANE
| 1355mm | |
| 1041mm | |
| 1750g | |
| 2 x 20A | |
| 2 x Brushless motor | |
| 10 x 9g |
- ,
- ,
- Massive Large Scale Plane ,
- High Detailed Model ,
- Highly Durable Tough EPO Construction ,
- Working Retracts ,
- Working Lights ,
- Can Take Off From Grass ,
- Twin Brushless Motors with counter-rotating props ,
- Sequenced servo operated retractable landing gear and gear doors ,
- All electronics pre-installed ,
- All linkages and control horns pre-installed ,
NitroTek
LARGE SCALE HC HOBBY MOSQUITO 5CH RC AEROPLANE
| 1355mm | |
| 950mm | |
| 1700g | |
| 2 x 30A | |
| 2 x Brushless motor | |
| 8 x 9g |
- ,
- ,
- Massive Large Scale Plane ,
- High Detailed Model Highly ,
- Durable Tough EPO Construction ,
- Working Retracts ,
- Working Lights ,
- Can Take Off From Grass ,
- Twin Brushless Motors with counter-rotating props ,
- Sequenced servo operated retractable landing gear and gear doors ,
- All servos pre-installed ,
- All linkages and control horns pre-installed ,
NitroTek
MINI REMOTE CONTROL HOVERCRAFT
| 3.7V lipo battery | |
| 4 * 1.5V AA (not included) | |
| 20-30 minutes | |
| 10 minutes | |
| 10 meters |
- ,
- ,
- Ruddered fan to provide thrust ,
- Black rubber skirt like real hovercraft ,
- Suitable for the bath, pond, and back garden ,
- Works on both land and water ,
NitroTek
1:16 SCALE RACING RC MOTORBIKE
| 27mhz, 40mhz | |
| 15Km/h - 10mph | |
| 32 x 13.5 x 24cm | |
| 7.2V800mA rechargeable battery(included) | |
| 9V battery(included) | |
| 5-6 hours | |
| about 20 Minutes. | |
| 16 scale motorcycle | |
| left, right, accelerate, brake |
- ,
- ,
- Rechargeable battery and charger ,
- Capable of up to 10mph ,
NitroTek
F-35 LIGHTNING 64MM GREY RC EDF JET PNP VERSION
| 608mm | |
| 840mm | |
| 600g | |
| 57g/dm2 | |
| 8.7dm2 | |
| 1000m |
- ,
- 9 gram servos ,
- Brushless motor and 25A ESC ,
- ,
- Pre-painted foam fuselage & wings ,
- Some Pre-installed electrics ,
- CAD engineering quality ,
- Stunning paintwork ,
- 64mm electric ducted fan ,
- State of the art components ,
- Can perform amazing aerobatics ,
- Is capable of the 'Cobra Manoeuvre' ,
NitroTek
F-117 BLACKNIGHT STEALTH 70MM EDF RC JET PNP VERSION
| 734mm | |
| 1100mm | |
| 980g | |
| 2836 outer runner brushless motor | |
| 45A ESC 5A UBEC |
- ,
- 70mm Ducted fan ,
- Seven 9g servos, one 17g servo ,
- Automatic landing gear system ,
- Steering front landing gear ,
- ,
- Pre-painted foam fuselage & wings ,
- 90% assembled ,
- Some Pre-installed electrics ,
- CAD engineering quality ,
- Automatic landing gear ,
- Stunning paintwork ,
- 70mm electric ducted fan ,
- State of the art components ,
- Can perform amazing aerobatics ,
NitroTek
F16 64MM RC JET VECTORED PNP VERSION IN BLACK AND GREY
| 800mm | |
| 1020mm | |
| 35 g/dm² | |
| 1100g |
- ,
- 7 pcs 9g servos ,
- Brushless motor 2632 out runner KV4100 ,
- 45A ESC 5A UBEC ,
- ,
- Pre-painted foam fuselage & wings ,
- Thrust vectoring ,
- 90% assembled ,
- Some Pre-installed electrics ,
- CAD engineering quality ,
- Stunning paintwork ,
- 64 mm electric ducted fan ,
- State of the art components ,
- Can perform amazing aerobatics ,
NitroTek
CESSNA 182 RED RC PLANE PNP VERSION
| 1030mm | |
| 930g | |
| 1410mm | |
| 34g/dm2 |
- ,
- 4pcs 9G servos ,
- Out-runner Brushless motor, KV900 ,
- 30A ESC ,
- ,
- Pre-painted foam fuselage & wings ,
- 90% assembled ,
- Some Pre-installed electrics ,
- CAD engineering quality ,
- Stunning paintwork ,
- State of the art components ,
- Can perform amazing aerobatics ,
NitroTek
AOWEI 1/5TH SCALE 26CC YAMA PETROL RC BUGGY 2.4GHZ
| 18kgf.cm/22kgf.cm; Throttle | |
| ≥200m | |
| 1/5 | |
| 80km/h | |
| Speedup, Forward, Turning Left & Right | |
| Rear 2WD Drive System | |
| Twin Rear Disc Brake | |
| single cylinder, two stroke, air-cooled, 26cc | |
| Gasoline Octane (93# or above) /+ Synthetic Oil (25 | |
| 0.5L | |
| Pull Start | |
| 170X60mm(F) / 170X80mm(R) | |
| 520mm | |
| 350mm(F) / 360mm( R ) | |
| 6.5/8.5(F/R) |
- ,
- Receiver(2.4G for racing ,Ni-H batteries 5x1.2v(2Channels) ,
- ,
- 2WD Twin Rear Disc Brake ,
- High Quality 2.4GHz Radio ,
- High Performance 26cc Engine ,
- Full-assembled Aluminium Chassis ,
- Fully Proportional Steering and Throttle ,
- Fully Adjustable Oil-filled Shock Absorbers ,
- Differential with the Built-in Gears ,
NitroTek
TARGA 38 EP ELECTRIC RADIO CONTROLLED BOAT RTR
| length 703mm, width 193mm |
- ,
- Completely factory assembled ,
- 600 type electric motor ,
- Professional 2-channel FM transmitter with servo reverse function (Mode 2) ,
- 2-channel FM receiver ,
- 3kg torque servo ,
- ESC with forward and reverse control ,
- Batterypack Ni-Cd 7,2V 1900mAh ,
- 3 hour fast UK charger ,
- ,
- Factory assembled model ,
- High quality from Dynam Rc ,
- Separate ESC with forward and reverse control ,
- Large 600 type racing motor ,
- 7.2V Battery pack ,
- High speed pro model ,
- Professional 2-channel FM transmitter with servo reverse function ,
- 3h mains fast charger ,
Our top of the range rc boat is the Dynam ...